The hydraulic press used by the customer is not equipped with a hydraulic system radiator in the original factory. It simply uses the fuel tank for passive heat dissipation. At present, after working for a few hours, the oil temperature goes to 80 degrees. Customer wants to install a hydraulic radiator to solve the problem of high oil temperature.
After detailed communication with the customer, RUIJIA COOLER engineer got the parameters required for the selection: 22kw motor, 100mVr oil pump. Based on these, the engineer selected the RJ-559 model. This hydraulic system radiator can meet the heat exchange demands. The maximum oil flow of this model is 40OL/min. The test pressure is 3.8Mpa. The cooling capacity is 43.2KW. The oil port size is 1-1/2 Rc thread. And the main dimensions are 730×315×560 (mm).
Oil cooler selection requires an experienced heat exchanger manufacturer, and RUIJIA COOLER is your wise choice. If you want to know more information about hydraulic air coolers, you can click on to our official website: www.rjcooler.com or call our service hotline: (86) 400-875-7507. RUIJIA COOLER manufacturer will serve you 24 hours a day.
